13 5/8" FSG515G , TCI Bit , Sealed Roller Bearing , Tricone Roller Bit , Reinforced Gauge Protection
PRODUCT SPECIFICATIONS
Bit Size : 13 5/8 inch ( 346.1mm)
IADC : 515
SERIES : FSG
Tooth type : ( TCI ) Tungsten Carbide Insert
Connection : 6 5/8 inch API REG PIN
Nozzle : three jet (side) nozzles
SIZE AVAILABLE
From 3 7/8inch to 36inch
RECOMMENDED DRILLING PARAMETERS FOR APPLICATION
| Types & IADC Code |
415 |
435
445
|
515
525
|
535
545
|
615
625
|
635 |
| WOB |
KN/mm(Bit Dia.) |
0.35~0.95 |
0.35~0.95 |
0.4~0.7 |
0.4~0.7 |
0.45~1.1 |
0.5~1.2 |
| Lb/in. (Bit Dia.) |
2000~5428 |
2000~5428 |
2285~4000 |
2285~4000 |
2571~6285 |
2857~6857 |
| Rotation Speed (Rpm) |
150~60 |
150~60 |
140~80 |
120~80 |
110~60 |
100~50 |
The above chart represents commonly available sizes and types, we do produce other sizes and types of rock bits which do not appear on this list. Please contact us for more information.
ROLLER CONE BIT CONE DESIGN
All three cones have the same shape except that the No. 1 cone has a spear point. One of the basic factors to be decided, in the design of the cones, is the journal or pin angle. The journal angle is formed between the axis of the journal and the horizontal. Since all three cones fit together, the journal angle specifies the outside contour of the bit. The use of an oversize angle increases the diameter of the cone and is most suitable for soft formation bits. Although this increases cone size, the gauge tip must be brought inwards to ensure the bit drills a gauge hole.
One important factor which affects journal angle is the degree of meshing or interfit (i.e. the distance that the crests of the teeth of one cone extend into the grooves of the other). The amount of interfit affects several aspects of bit design.
1. It allows increased space for tooth depth, more space for bearings and greater cone thickness
2. It allows mechanical cleaning of the grooves, thus helping to prevent bit balling
3. It provides space for one cone to extend across the centre of the hole to prevent coring effects
4. It helps the cutting action of the cones by increasing cone slippage.
Product Tags:
|
|
13 5/8 Inch Tricone Roller Bit Reinforced Gauge Protection ISO 9001 Approved Images
|
